Alterações no passo nº 5
Edição por Clay Eickemeyer —
Edição aprovada por Clay Eickemeyer
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Remove the stretch release adhesive | |
| [* black] Use your blunt nose tweezers to grip the entire length of an adhesive strip's pull tab. | |
| [* black] Twist your tweezers to roll the adhesive strip over itself and pull it slowly, evenly, and at a low angle out from under the battery. | |
| [* icon_note] Give the strip plenty of time to stretch. Avoid dragging it over cables or components as you pull. | |
| - | [* icon_note] If you're using your fingers, re-grip the strip often to avoid tearing. |
| - | [* black] Repeat |
| - | [* icon_note] If a strip breaks off, try to retrieve it from under the battery. If you can't retrieve it, don't worry |
| + | [* icon_note] If you're using your fingers, re-grip the strip often to avoid it stretching unevenly and tearing. |
| + | [* black] Repeat for the other strip. |
| + | [* icon_note] If a strip breaks off, try to retrieve it from under the battery. If you can't retrieve it, don't worry! Move on to the next step for an alternate method. |